Gladiator GANA04CKMX handleiding
Handleiding
Je bekijkt pagina 17 van 58
17
INSTALL CABINET TO GLADIATOR
®
GEARWALL
®
PANEL
NOTE: Gladiator
®
Flex Brackets are sold individually and
Gladiator
®
GearWall
®
panels are sold separately.
NOTE: For installation of the Gladiator
®
GearWall
®
panels, please
refer to the manual instructions included with the Gladiator
®
GearWall
®
panels.
Install the 24" Wall Cabinet
Install the 24" 1-drawer 2-door
Base Cabinet
27"
■ Install two brackets to the base cabinet. (see instruction on
Page 15)
■ Hang the base cabinet onto the GearWall
®
panels.
■ Make sure both brackets are fully engaged in the slots as
shown. Install the drawer back to the base cabinet. (See
instruction on page 18)
The GearWall
®
panels should be
installed with the spacing as shown.
Tighten the M6 x 16 hex socket
head screws from the inside of
the wall cabinet
■ Install the bracket to the wall cabinet. (see instruction on Page
13)
■ Hang the wall cabinet onto the GearWall
®
panels.
■ Make sure the bracket is fully engaged in the wall slots as
shown. Tighten the pre-attached M6 x 16 hex socket head
screws fully into the bracket and make sure they go into the
wall slots.
Bekijk gratis de handleiding van Gladiator GANA04CKMX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gladiator |
| Model | GANA04CKMX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11272 MB |
