Handleiding
Je bekijkt pagina 16 van 68
6
Model: GVHC & F Installation
!! IMPORTANT NOTE:
If the palletized unit showed any signs of damage, you should have immediately inspected the equipment and all
other packed accessories, and promptly notified the freight company of all damages. Typically, it is the
purchaser’s responsibility to make freight damage claims.
• The unit is very heavy and top‐heavy! Exercise due caution when handling to avoid personal injury or damage
to the equipment or property. Take necessary precautions to avoid damaging hood base & skirt, or hood floor
stand.
• Exercise care when removing the wooden crating to avoid any exposed nails or staples.
• Failure to comply with these CAUTION notices may result in minor to moderate injury, damage to equipment or
property, and void the warranty.
2.02 Unpacking
2.01 Location ‐ continued
3. DO NOT attach additional ductwork to the exhaust outlet in an attempt to redirect airflow. Resulting back
pressure can significantly reduce hood capture and result in unsatisfactory performance.
4. When installing a model GVH‐F floor stand version, be sure floor is relatively level. The hood stand has
adjustable leveling legs and after final positioning, legs should be adjusted to the level unit (side to side, front to
back and corner to corner).
The front legs have floor plates and the stand must be anchored to the floor using appropriate methods.
Unit is shipped on a wooden pallet, secured by hightensile plastic strapping and wrapped in machineapplied
stretch wrap. In most cases a wooden framework is built around the unit for added protection. Unpack unit as
follows:
1. Position pallet in an area that provides adequate space for unpacking.
2. Remove the plastic stretch wrap, strapping and other packaging materials as necessary.
3. Carefully remove any wooden supports and/or crate framework that might be attached.
4. Locate and secure the envelope containing Warranty Card, other documentation or hardware provided for
installation.
5. Model GVH‐F: The unit is shipped without legs installed to avoid damage. The adjustable legs are packaged in a
separate carton and secured on shipping pallet ... be sure to secure and retain, see Adjustable Leg Installation
below.
1. Obtain carton with adjustable legs ... two (2) floor‐plate style & two (2) standard.
2. With appliance resting on a stable surface, have helpers tilt the unit forward and hold.
3. Install the two (2) standard legs at corners of stand side ... screw in clockwise until hand tight. Take care not
to cross‐thread ... the leg should turn fairly easy until tight.
4. Have helpers tilt unit back onto the installed rear legs, giving access to front of stand. Repeat the process
for front two (2) floor‐plate legs.
Installing Adjustable Floor Stand Legs: GVH−F
Bekijk gratis de handleiding van Giles GVH-C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Giles |
| Model | GVH-C |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 16793 MB |
