Handleiding
Je bekijkt pagina 40 van 68
30
4.02.4 E.A.C. Collector Cell / HEPA Filter Removal
Hood Operation Free Standing Ventless Hood
FSH-2 & FSH-2A-99
4.02.5 E.A.C. Collector Cell / HEPA Filter Installation
E
A
C
1
E
A
C
2
① Unlatch access cover & lift off.
② Grasp E.A.C. Collector Cell / HEPA Filter & pull straight out, on a slight upward angle.
Turn OFF hood power ...
E
A
C
Pin must align & fit
thru hole in rear of
cell.
Airflow
arrow
must point
up
2
1
①Ensure the airflow indicator arrow
points [UP] & the cell’s contact pad
faces to the right side.
②Align cell (or filter) in guides and
slide into hood. If installed properly,
cell is flush with hood front. If not,
cell is not installed incorrectly.
③Replace access cover and latch.
E
A
C
NOTE: HEPA Filter models ONLY ‐ charcoal filter will be located below the HEPA filter, so that air passes through it first.
When installed, the filter must properly engage a proofing switch located on the back wall.
Bekijk gratis de handleiding van Giles FSH-2A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Giles |
| Model | FSH-2A |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 15381 MB |
