Gigabyte BRIX GB-BTIP-N250 handleiding
Handleiding
Je bekijkt pagina 31 van 32
- 31 -
System Hardware Installation
3-6 Support 2.5’’ HDD / SSD
Follow these instructions to install the 2.5" HDD/SSD:
1. Unscrew and remove the bottom cover.
(
將底蓋從機器上移除。
)
2. Install the HDD / SSD on the bottom panel and secure with four screws provided, then connect
the cable to the HDD / SSD.
(
用隨附的四顆螺絲將HDD / SSD固定於底蓋，並將傳輸線連接於HDD / SSD。
)
3. Reinstall the bottom cover with HDD / SSD to system.
(
將裝有HDD / SSD的底蓋鎖回機器上。
)
NOTE!
Please check the cable is well connected to the SATA connector on the motherboard.
注意! 請確認傳輸線是否以正確連接到主板上的SATA接頭。
3
1
2
Bekijk gratis de handleiding van Gigabyte BRIX GB-BTIP-N250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gigabyte |
| Model | BRIX GB-BTIP-N250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3796 MB |
