GeoVision GV-GDRF4800 handleiding
Handleiding
Je bekijkt pagina 34 van 77
23
3.3 Alarm Configuration
3.3.1 Motion Detection
Go to Alarm→Motion Detection to set motion detection alarm.
1. Check “Enable” check box to activate motion-based alarms. If unchecked, the camera will
not send out any signals to trigger motion-based recording to the NVR or CMS, even if
there is motion in the video.
Effective Target: Choose “Human” or “Motor Vehicle”. If “Human/Motor Vehicle” is enabled,
the camera will only detect the movement of human/motor vehicle. If no target is enabled,
alarms will be triggered when the moving object appears on the image, including human,
vehicle or other moving objects.
Note: Enabling the Effective Target (for Human or Motor Vehicle) helps detect specific
objects and reduces false alarms. However, note that the accuracy of this feature may vary
due to environmental factors. Adjust settings as needed for optimal performance.
Alarm Holding Time: It refers to the interval time between the adjacent motion detections.
For instance, if the alarm holding time is set to 20 seconds, once the camera detects a motion,
it will go to alarm and would not detect any other motion in 20 seconds. If there is another
motion detected during this period, it will be considered as continuous movement; otherwise,
it will be considered as a single motion.
2. Set motion detection area and sensitivity.
Move the “Sensitivity” scroll bar to set the sensitivity. Higher sensitivity value means that
motion will be triggered more easily.
Bekijk gratis de handleiding van GeoVision GV-GDRF4800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GeoVision |
| Model | GV-GDRF4800 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 13260 MB |
