GeoVision GV-GBLN4800 handleiding
Handleiding
Je bekijkt pagina 36 van 84
27
3.3.3 Alarm Server
Go to Alarm→Alarm Server as shown below.
Click “Edit” to set the alarm server.
Set the server address, port, heartbeat and heartbeat interval. When an alarm occurs,
the camera will transfer the alarm event to the alarm server. If an alarm server is not
needed, there is no need to configure this section.
Click to view the entire server address; click to hide a part of sensitive
data.
3.3.4 Video Exception
Only some models support this function.
This function can detect changes in the surveillance environment affected by external
factors.
To set video exception detection:
Go to Config→Event→Video Exception as shown below.
1. Enable the applicable detection that’s desired.
Scene Change Detection: Alarms will be triggered if the scene of the monitor video
has changed.
Video Blur Detection: Alarms will be triggered if the video becomes blurry.
Abnormal Color Detection: Alarms will be triggered if the image is abnormal
because of color deviation.
2. Set the alarm holding time.
3. Click “Save” button to save the settings.
Bekijk gratis de handleiding van GeoVision GV-GBLN4800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GeoVision |
| Model | GV-GBLN4800 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 12334 MB |
