GeoVision GV-GBLN4800 handleiding
Handleiding
Je bekijkt pagina 35 van 84
26
2. Click “Enable” and set the alarm holding time.
3. Trigger alarm out. When the IP address of the camera conflicts with the IP address
of other devices, the system will trigger the alarm out.
Note: if your camera doesn’t support alarm out, you can go to
Config→Maintenance→ Operation Log to check the relevant alarm information
after enabling this function.
⚫ Cable Disconnection
Go to Config→Alarm→ Exception Alarm →Cable Disconnected as shown below.
2. Click “Enable” and set the alarm holding time.
3. Trigger alarm out. When the camera is disconnected, the system will trigger the
alarm out.
Note: if your camera doesn’t support alarm out, you can go to
Config→Maintenance→ Operation Log to check the relevant alarm information
after enabling this function.
Bekijk gratis de handleiding van GeoVision GV-GBLN4800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GeoVision |
| Model | GV-GBLN4800 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 12334 MB |
