Gentrax GTX3500 handleiding
Handleiding
Je bekijkt pagina 8 van 22
7
2）CHECK ENGINE OIL
Make sure the engine oil is at the upper level of the oil filler hole. Add oil as
necessary.
Remove oil filler cap and check the engine oil level.
If oil level is below the lower level line, refill with suitable oil to upper level
line. Do not screw in the oil filler cap when checking oil level.
Change oil if contaminated.
Oil capacity: (see page 17)
Recommended engine oil:
API Service “SJ”
3）GROUND (Earth)
Make sure to ground (earth) the generator.
4）CONNET BATTERY(for electric starting system)
Loosen the screw and remove the battery cover.
Clamp the red wire to the positive (+) terminal and the black wire to the
negative (-) terminal of the battery. Do not reverse these positions.
Be sure the battery is installed on the battery mount tray securely.
Install the cover and tighten the screw.
NOTE: ───────────
Recommended battery: 12V6AH
───────────────
32¡ã
F F
80¡ã
25¡ã
CC
0¡ã
or 10W-30
SAE #30
or 10W-40
SAE #20
or 10W-30
or 10W-40or 10W-40
or 10W-30
SAE 10W
Bekijk gratis de handleiding van Gentrax GTX3500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gentrax |
| Model | GTX3500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3224 MB |
