Gentrax GT2000 handleiding
Handleiding
Je bekijkt pagina 7 van 16
STARTING THE GENERATOR
Before using this generator it must be
prepared correctly before use. Locate the
generator on firm level ground away from
buildings or other structures ensuring that the
exhaust is not obstructed.
Before starting the engine make sure that all
the electrical loads are disconnected from the
generator AC outlet socket.
Open the fuel filler cap vent and the fuel cock
Turn the engine switch to the On position
and the economy switch to the Off position
Set the choke to the “CHOKE” position. If
engine is hot, generator may be started
with choke position being on “RUN”
Hold down the generator firmly with one
hand. With the other hand grip the recoil
starter cord handle and pull slowly until
resistance is felt indicating that the recoil
starter is engaged. When resistance is felt
pull the cord sharply. Continue this
procedure until the engine starts.
Once started, turn the choke switch to “RUN”
6 INVERTER GENERATOR: User Manual
OPEN
ON
ON
ENGINE
SWITCH
STOP
C
M
Y
CM
MY
CY
CMY
K
Page 6.ai 1 9/2/2014 7:17:46 AMPage 6.ai 1 9/2/2014 7:17:46 AM
Bekijk gratis de handleiding van Gentrax GT2000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gentrax |
| Model | GT2000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3270 MB |
