Genesis GLAG2045B handleiding
Handleiding
Je bekijkt pagina 6 van 30
ENGLISH
SPECIFICATIONS
UNPACKING & CONTENTS
IMPORTANT: Due to modern mass production techniques, it is unlikely the tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure
to do so could result in serious personal injury.
CONTENT IN PACKAGE
Description Quantity
Motor Power ................ 20V DC
No-Load Speed ............ 7000 RPM
Wheel Size ................... 4-1/2” (115mm)
Spindle Size ................ 5/8”-11 UNC
Battery ........................ 20V Lithium-ion, 2.0Ah
Charger ....................... 120V~/60Hz, 1.7A
Net Weight ................... 3.6 lb.
Angle Grinder 1
Battery Pack GLAB2020B 1
Charger 1
Auxiliary Handle 1
Grinding Wheel 1
Spanner Wrench 1
Operator’s Manual 1
Description Quantity
SPECIFIC SAFETY RULES FOR CORDLESS ANGLE GRINDERS
personal protective equipment. Fragments of workpiece
or of a broken accessory may fly away and cause injury
beyond immediate area of operation.
• Watch out for flying sparks. Hold the tool so
that sparks fly away from you and other persons or
flammable materials.
• Do not leave the tool running. Operate the
tool only when hand-held.
• Never lay the tool down until the accessory
has come to a complete stop. The spinning
accessory may grab the surface and pull the power tool
out of your control.
• Do not touch the workpiece immediately
after operation; it may be extremely hot and could burn
your skin.
• ALWAYS wear proper apparel including long
sleeve shirts, leather gloves and shop aprons to protect
skin from contact with hot grindings.
• Wear eye and hearing protection.
Always
use safety glasses with side shields. Unless otherwise
specified, everyday glasses provide only limited impact
resistance, they are not safety glasses. Use only certified
safety equipment; eye protection equipment should
comply with ANSI z87.1 standards. Protective hearing
equipment should comply with ANSI s3.19 standards.
• Protect your lungs
.
Wear a face or dust mask if
the operation is dusty. Following this rule will reduce the
risk of personal injury.
• Always disconnect the battery pack from
the tool or place the switch in the locked or off
position before any assembly, adjustments or changing
of accessories. Following this instruction will reduce the
risk of serious personal injury.
• Do not place battery tools or their batteries
near fire or heat.
This will reduce the risk of
explosion and possibly personal injury.
• Never use a battery which has been
dropped or received a sharp blow. A damaged
battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately.
• Use designated battery packs (Genesis™
- Model GLAB2020B or GLAB2040B) and
charger for this tool. Use of any other batteries
may result in a risk of fire.
Bekijk gratis de handleiding van Genesis GLAG2045B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Genesis |
| Model | GLAG2045B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5365 MB |
