Genesis GLAG2045B handleiding
Handleiding
Je bekijkt pagina 5 van 30
5
ENGLISH
SPECIFIC SAFETY RULES FOR CORDLESS ANGLE GRINDERS
WARNING: Do not let comfort or
familiarity with product (gained from repeated use)
replace strict adherence to product safety rules. If you
use this tool unsafely or incorrectly, you can suffer
serious personal injury!
WARNING: Hold the tool by insulated
gripping surfaces when performing an operation where
cutting tools may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal parts
of the tool “live” and shock the operator!
• Be aware that this tool is always in an
operating condition
,
because it does not have to
be plugged into an electric outlet.
• Always use the proper type of guard with
grinder accessories. A guard protects the operator
from broken wheel fragments.
• Accessories must be rated for at least the
speed recommended on the tool warning label.
Wheels and other accessories running over the rated
speed can fly apart and cause injury.
• Make sure that the grinding wheel and the
guard is securely attached before operating the
grinder.
• Check the grinding wheel carefully for
visible defects before operation. Replace
cracked, chipped, or warped wheels immediately.
Run the tool (with guard) at no-load speed for about
a minute, holding tool away from others. If wheel is
flawed, it will likely separate during this test.
• When using depressed center grinding
wheels, be sure to use only fiberglass reinforced
wheels.
• Use only flanges and clamp nut specified
for this tool. Do not overtighten the clamp nut on
the grinding wheel. Excessive tightening can cause the
wheel to crack during operation.
• NEVER use the tool with wood cutting
blades or other saw blades. Such blades when
used on a grinder frequently kick back and cause loss
of control leading to personal injury.
• Hold the tool firmly with both hands.
• Keep hands away from rotating parts.
• Make sure the wheel is not contacting the
workpiece before turning on the switch.
• Before using the tool on an actual
workpiece, let it run for a while. Watch for
vibration or wobbling that could indicate poor installation
or a poorly balanced wheel.
• Use the specified surface of the wheel to
perform the grinding. Never use the side or upper
surfaces for cutting.
• Keep bystanders a safe distance away from
work area. Anyone entering the work area must wear
SYMBOLS
SYMBol DeSCripTion SYMBol DeSCripTion SYMBol DeSCripTion
V
Volts
RPM
Revolutions per
minute
Warning symbol. Precautions that involve
your safety
A
Amperes
SPM
Strokes per
minute
To reduce the risk of injury, read Operator's
Manual before using this product
Hz
Hertz
OPM
Oscillations per
minute
Wear safety glasses, ear protection and
respiratory protection
W
Watts
or A.C.
Alternating
current
Do not dispose with household waste
No Load Speed
or D.C.
Direct current Do not touch the running blade
kg
Kilograms
Do not use in
wet conditions
Class II Double Insulated construction
H
Hours
Battery cannot
exceed 59 °C
This symbol designates that this product is
listed with U.S. and Canada requirements
by ETL testing Laboratories, Inc.
.../min
Per minute
Do not put
battery in fire
IMPORTANT: Some of the following symbols may be used on your product and appear throughout the manual.
Please study them and learn their meaning for critical information to operate the tool safely.
Bekijk gratis de handleiding van Genesis GLAG2045B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Genesis |
| Model | GLAG2045B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5365 MB |
