Genaray PX-MOD-3 handleiding
Handleiding
Je bekijkt pagina 29 van 36
Modular RGB Pixel Panel - USER MANUAL
29
System: Determined by the total number
of pixels in a multi-light setup.
Select Off (default – for using the panel as
a single light), or any number of pixels in
2-pixel increments, up to 320 (for multi-
light setups.)
Example: A multi-light system with 3
panels, each set to 8 pixels, would have a
system size of 24 pixels
Index: Sets the panel’s location in a
multi-light system.
Pixels play in consecutive order from
the lowest number to the highest. The
index indicates the panel’s starting and
ending pixel number when the panels
are triggered by the RGB Series app. The
pixels will play in numerical order and
repeat without pausing, for a continuous
loop.
· N/A is the default value and should be
selected when using the panel as a
single light.
· Select the pixel numbers designated
for the panel in a multi-light setup,
and the order in which the panel plays
the effect.
Example: If the number of pixels is set
to 8, then your options are 1–8, 3–10,
5–12, 7–14, 9–16…up to a maximum of
320 pixels.
If the pixel number is set to 16, then
your options are 1–16, 3–18, 5–20,
7–22, 9–24...up to a maximum of 320
pixels.
instructions
Bekijk gratis de handleiding van Genaray PX-MOD-3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Genaray |
| Model | PX-MOD-3 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3144 MB |
