Gefen ToolBox GTB-HD4K2K-441 handleiding
Handleiding
Je bekijkt pagina 26 van 98
page | 16
Advanced Operation
Commands
Conguration
Command Description
#echo
Enables / disables RS-232 feedback
#fadefault
Resets the routing and masking to factory-default
settings
#hdcp
Enables / disables HDCP detection
#hdp_pulse
Cycles with HPD line on the specied output
#lock_edid
Locks the local EDID when the switcher is power-cycled
#power
Toggles the power on the switcher
#reboot
Reboots the switcher
#set_edid
Sets the specied EDID to an input or bank
#set_ir
Sets the IR channel for the switcher
#set_udp_port
Sets the local UDP listening port
#set_udp_remote_ip
Sets the remote UDP IP address
#set_udp_remote_port
Sets the remote UDP listening port
#show_hdcp
Displays the HDCP status of the specied input
#show_ir
Displays the current IR channel of the switcher
#show_out_colordpt
Displays the maximum color depth supported by the
display (sink) device based on the EDID
#show_out_res
Displays the maximum video resolution supported by
the display (sink) device, based on the EDID
#show_udp_port
Displays the current local UDP listening port
#show_udp_remote_ip
Displays the current remote UDP IP address
#show_udp_remote_port
Displays the current remote UDP listening port
#use_udp_enable
Enables / disables UDP access
n
Displays the routing status of the output
s
Routes the specied input to the output
Bekijk gratis de handleiding van Gefen ToolBox GTB-HD4K2K-441, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | ToolBox GTB-HD4K2K-441 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10626 MB |
