Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 56 van 134
56
USB Roaming
The USB Roaming feature allows you to
control a video wall of sources with a
single mouse and keyboard. Mouse and
keyboard emulation will have the ability
to roam across screens to control the
respective sources.
1. K/M over IP must be enabled for this
feature to work for the Transmitter
and Receiver.
2. Click Apply and reboot the device when prompted.
Assigning USB Roaming Group Layout
Conguration can be performed via API command, but it is recommended to use
GF-AVIP-MC. Go to the USB Roaming page on a matrix controller to assign the layout.
For API control see the Gen3 API manual.
The example below shows a 2x1 layout with assigned receiver. Make sure to set the
Master Receiver that will have USB Control, and click Save Group.
Assigning Source to USB Roaming Group Layout: Route each source to each display in
the USB Roaming Group Layout.
Execute/Stop USB Roaming: To activate the USB Roaming for your group, click on
the Roaming Group Preset created and click the Execute button. Make sure a USB
keyboard and mouse are connected to the Master Receiver that’s assigned to the group.
To stop USB Roaming, click the Stop button.
USB Roaming
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
