Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 43 van 134
43
5. Locate the USB over IP group and make sure the Enable USB over IP box is
checked. This is the default setting. Note that in unicast mode, the Operation Mode
is automatically set to Active on link and cannot be changed.
6. Make sure that the USB Mouse Mode is set to High Resolution. This is the default
setting. Use Compatibility mode only if using additional KVM switchers or other
devices within the system that causes the mouse to behave erratically.
7. Click the Apply button within the USB over IP group, then click the Reboot button
at the bottom of the page.
8. Connect the USB host (e.g., computer) to the USB port on the Sender unit.
9. Connect a USB device (keyboard and/or mouse) to a USB port on the Receiver unit.
Up to 7 USB devices can be connected per network in unicast mode.
The keyboard and mouse (or other USB device) can now be used from the Receiver
unit.
Important: When enabling or disabling USB over IP, the Apply and Reboot buttons must
be clicked to apply changes.
USB Control
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
