Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 33 van 134
33
1. Access the Web interface for each Sender and Receiver unit that will be using
unicast mode. In this example, we will start with Receiver unit R1.
2. Log in as “Administrator.”
Tip: In unicast mode, the 4K60 HDMI & USB-C KVM over IP behaves as a KVM switcher.
3. Click the Network tab.
4. Click the Unicast button under the Network Mode window group.
5. Click the Apply button. The following message will appear:
6. Click the Reboot button at the bottom of the page. If the Reboot button is not
clicked, the following message will be displayed, indicating that the unit must be
rebooted.
7. Repeat steps 1 - 6 in order to congure the Sender unit for unicast mode.
Important: When switching between unicast and multicast modes, both Sender and
Receiver units must be set to the same mode.
Switching between Sender Units in Unicast Mode
When multiple Sender and Receiver unit are used in unicast mode, the 4K Ultra HD
HDMI & USB-C KVM over IP behaves as a switcher. In unicast mode, a Sender unit can
communicate with only one Receiver unit at a time.
In the example below, Receiver unit R1 will be switched to receive the source connected
to Sender unit S1. To do this, simply change the video channel.
Unicast & Multicast Modes
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
