Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 23 van 134
23
Setting the Video Channel
In order for a Sender and Receiver unit to communicate with one another, they must
both be set to the same video channel. This is similar to changing the channel on a
set-top box in order to view a different program. Pressing and releasing either the CH+
or CH- buttons on the front of the Receiver unit can also be used to change the video
channel. Both methods will be covered in this section. By default, Sender units are set to
Channel1 and Receiver units are set to Channel 0.
Setting the Channel Using the Web Interface
1. Access the Web interface by entering the IP address of the desired Sender or
Receiver unit.
2. Log in as “Administrator” or “User.”
3. Click the Functions tab. The current channel is displayed within the Channel Setup
window group.
4. Type the desired channel number. Channel numbers can range from 0 to 39900.
5. Click the Apply button on the right-hand side of Channel Setup window group.
6. The following message will be displayed, at the top of the page, indicating that the
selected channel has been applied.
If the entered value is invalid, then the following message will be displayed:
7. Access the Web interface of the next unit (Sender or Receiver) by entering its IP
address.
8. Repeat steps 1-5 for each Sender and Receiver to be changed.
Setting the Video Channel
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
