Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 20 van 134
20
Supplementary Connections
USB
For more information on using USB devices, see “USB Control” on page 42.
1. Connect a USB-C cable from the computer to the USB-C In port on the Sender unit.
Connect a maximum of two USB devices to the Receiver unit.
IR
For more details on IR control, see “IR Control” on page 48.
1. Connect an IR Emitter (Gefen part no. EXT-IREMIT) to the Sender unit and attach it to
the IR sensor on the device to be controlled.
2. Connect an IR Extender (Gefen part no. EXT-RMT-EXTIRN) to the Receiver unit if the
IR sensor will not be within line-of-site for proper IR control.
Audio
For more information on using audio devices, see “Audio Connections” on page 50.
1. Connect a 3.5mm mini-stereo cable from the Line In port on the Sender unit to an
audio source.
2. Connect a pair of powered speakers (or another audio output device) to the Line Out
port on the Receiver unit.
3. Connect a USB microphone / headset to one of the USB 2.0 ports on the Receiver
unit
4. Connect a TOSLINK cable from a 4K UHD Display digital Optical Audio Output to the
Opt In port on the Receiver unit. (For routing Audio Return Path)
5. Connect an AVR Receiver (or another audio output device) to the Opt Out port on
the Transmitter unit. (For routing Audio Return Path)
RS-232
For more information on using RS-232 control, see “Using RS-232” on page 39.
1. Connect an RS-232 cable from the PC or automation system to the RS-232 port on
the Sender unit.
2. Connect an RS-232 cable from the Receiver unit to the RS-232 device to be
controlled.
Supplementary Connections
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
