Gefen GEF-DVI-16416-PB handleiding
Handleiding
Je bekijkt pagina 22 van 51
19
IR REMOTE CONFIGURATION
How to Resolve IR Code Confl icts
In the event that IR commands from other remote controls interfere with the
supplied IR Remote Control unit, changing the IR Remote Control’s IR channel
will fi x the problem. The IR Remote Control unit has a bank of DIP switches used
for setting the IR channel.
The DIP switch bank is located underneath the battery cover.
1 2
1 2
1 2
1 2
Remote Channel 2:
Remote Channel 0:
Default
Remote Channel 1:
Remote Channel 3:
Left: Picture of the opened rear battery
compartment of the IR remote showing the
exposed DIP Switch bank between the battery
chambers.
It is important that the IR channel on the Remote Control unit, matches the IR
channel set on the 16x16 DVI Matrix. For example, if both DIP switches on the
IR Remote Control unit are set to IR channel 0 (both DIP switches down), then
the 16x16 DVI Matrix must also be set to IR channel 0. See page 30 on how to
change the IR channel on the 16x16 DVI Matrix.
Bekijk gratis de handleiding van Gefen GEF-DVI-16416-PB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GEF-DVI-16416-PB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5951 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 12800 g |
| Stroomvoorziening | 100-240 V AC / 5V DC, 1.0A |
| LED-indicatoren | Ja |
| Gebruiksaanwijzing | Ja |
