Gefen EXT-VGA-141SRN handleiding
Handleiding
Je bekijkt pagina 12 van 20
8
CONNECTING THE VGA EXTENDER SRN
How to Connect the VGA Extender SRN
1. Connect the VGA Extender SRN sender unit to the VGA output on the back
of your computer. The supplied six foot M-F VGA cable connects the CPU
and sender unit together.
2. Connect the VGA Extender SRN receiver unit to your monitor with the VGA
cable that is attached to your monitor.
3. Connect CAT5 cable between the VGA Extender SRN sender and receiver.
4. Plug the 5-Volt power supply into the sender unit. The VGA Extender SRN
receiver unit will draw power from the sender.
Display information (EDID) is not sent back to the source. Standard
VESA resolutions should be output by most computers without the
need of an EDID. If using non-VESA-standard resolutions or if EDID
is needed, an EDID storage and relay device is needed. Gefen
recommends using the DVI Detective (Gefen Part No. EXT-DVI-EDID,
EXT-DVI-EDIDN, or EXT-DVI-EDIDP) with two VGA to DVI adapters.
Wiring Diagram for the VGA Extender SRN
EXT-VGA-141SR
Sender
Receiver
Computer
CAT-5E CABLE
VGA CABLE
(Up To 150 FT)
VGA Display
Attention: This product should always be connected to a grounded
electrical socket.
Bekijk gratis de handleiding van Gefen EXT-VGA-141SRN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | EXT-VGA-141SRN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2417 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Ingangsspanning | 5 V |
| Aansluitingen | RJ-45 |
| Aansluiting 1 | HD-15 |
| Aansluiting 2 | HD-15 |
