GE RAK190V handleiding
Handleiding
Je bekijkt pagina 3 van 37
31-5000842 Rev. 1 3
PACKAGE CONTENTS/TOOLS REQUIRED:
Package includes:
• Thermostat base
• Thermostat
• Screws
• Wall anchors
• 2-Way and 1-Way Thermostat Connectors
Tools needed:
'ULOOZLWKƎELW
• Hammer
• Screwdriver
• Putty
WARNING
ELECTRICAL SHOCK HAZARD — Turn off power by
unplugging the unit or by removing the fuse or switching
the appropriate circuit breaker to the OFF position before
removing the existing thermostat. Failure to do so could
result in risk of electric shock.
INSTALLATION INSTRUCTIONS
TO REMOVE EXISTING THERMOSTAT
1. Turn off power to heating and cooling system by removing the fuse or
switching off the appropriate circuit breaker.
2.
Remove cover of old thermostat. This should expose the wires.
3. Remove wires from wire terminals. Note which color wires are attached
to each terminal.
4. Remove existing thermostat base from wall.
5.
Refer to the following section for instructions on how to install this
thermostat.
Bekijk gratis de handleiding van GE RAK190V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GE |
| Model | RAK190V |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 3107 MB |