GE JXRB67 handleiding
Handleiding
Je bekijkt pagina 4 van 4
4
959-0336-001 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Pub. No. 49-80187
Dwg. No. 164D4290P343
(N.D. 682) 2/03
STEP 7 CONNECT ELECTRICAL
• Use electrical wiring and connectors that conform to
local codes (14 gauge min. is recommended). Use a
length to reach between the vent and the blower/
motor location.
• Attach the wires from the blower conduit to the end
of new wiring.
• Thread the wires through the end of the control box.
Use wire nuts to secure the wire to the 3” remain-
ing wires with plug attached.
• Reinstall the control box onto the plenum.
• Tighten the screw on the fitting at the end of the
control box.
• Install a junction box (per local code) within reach
of the blower conduit.
• Use a conduit fitting to secure conduit to junction
box. The red plastic anti-short bushing should be
secured to the end of the conduit.
• Use wire nuts to connect wires. Push wires into the
junction box and install the cover.
Control Box
Tighten
Screw
TEST OPERATION
• Turn power on at the circuit breaker. Plug power
cord into a properly grounded receptacle.
• Refer to the Downdraft Vent Owner’s Manual for
operating instructions.
Bekijk gratis de handleiding van GE JXRB67, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GE |
| Model | JXRB67 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 571 MB |
