GBC W12 handleiding
Handleiding
Je bekijkt pagina 5 van 40
5
Instruction Manual
EN
1. Set the punch
1
Lift the punch handle (1) to the upright position.
2
Place entire document (max. 12 sheets) so it rests on
the base table.
2. Set paper size
1
Move the paper edge guide (4) to adjust for paper size
A4 and other sizes (g. B).
Note: The black knob on the left side of the machine is
used to select the margin depth. This feature is ideal for
thicker documents that require wider margins for easy
page turning and more secure binding (g. A).
3. Punch paper
1
Lower the raised handle until the paper is punched
and support the machine when lifting the handle to the
upright position (g. C).
4. Wire binding
1
Place the wire (open side up) on the wire support.
2
Feed each paper stack onto the wire and repeat until
your document is complete (g. D).
3
Support the document and wire on removal from the
wire support.
4
Slide the wire size adjuster to the required diameter (6)
(g. E).
5
Insert the document into the wire closing jaws (wire
opening towards back plate).
6
Support the document and pull down the wire closing
handle (1) to close the jaws (g. F).
7
Use the wire closing guide (located in the wire closing
jaws) to ensure correct closure of the wire.
8
Remove document from wire closer.
Binding tips:
To hide the spine of the wire:
• Load the internal sheets onto the wire rst, repeating until
all are loaded.
• Load the front PVC cover onto the wire element.
• Load the rear cover onto the wire element last.
• It is best to close the wire a little, check, and then close
the wire a little more until you are happy with the wire
closure.
• Always use the wire size closing guide (located in the
wire closing jaws) to prevent over closing the wire.
• For further hints and tips please visit our website:
www.gbceurope.com
Wire punch and binding instructions
For use with GBC 34 loop wire elements.
Bekijk gratis de handleiding van GBC W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GBC |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5422 MB |
