GBC W12 handleiding
Handleiding
Je bekijkt pagina 4 van 40
4
Instruction Manual
EN
Specications
GBC W12 Wire Closer & Punch
Operation Mode Manual
Paper Formats A4, A5, US Letter
Number of Punch Slots 34
Punching Paper (70gsm) 12 sheets
Punching PVC Plastic Foils (0.2mm) 2
Max. Wire Diameter 14.3mm
Binding Capacity 125 sheets
Machine Dimensions (H x W x D) 160 x 377 x 255mm
Net Weight 6.3kg
Location of controls
1 Handle
2 Cover
3 Paper Slot
4 Paper Edge Guide
5 Base Table
6 Wire Size Adjuster
7 Waste Tray
8 Margin Adjuster
m
Safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS
IS IMPORTANT TO ACCO BRANDS EUROPE. IN THIS
INSTRUCTION MANUAL AND ON THE PRODUCT
ARE IMPORTANT SAFETY MESSAGES. READ THESE
MESSAGES CAREFULLY.
• In order to avoid overloading your machine, please refer
to the maximum punch guide located on the front of your
machine before punching.
• When punching PVC/PP covers, we recommend the
cover be punched with some paper either side.
• DO NOT punch metallic objects such as staples or paper
clips.
• Please empty the waste tray regularly.
• Ensure that the machine is operated on a at stable
surface.
• Never lift the machine by the punching handle. Always
use the hand grips located on the side of the machine.
• To avoid risk of injury DO NOT put your ngers into the
wire binding channel.
• The binder is not to be exposed to temperature / humidity
conditions that would cause condensation. Maximum
ambient temperature: 40ºC
• This equipment is not suitable for use in locations where
children are likely to be present.
• Use the device in a suitable, properly installed and easily
accessible mains power socket. Locate near the outlet
and do not use extension cords. Make sure the device
can be disconnected from the mains at all times.
Setting up
• Your machine is ready to use when removed from the
box. Retain the packaging in case you need to return the
machine for repair.
• The punching mechanism is coated with a protective
lm of lubricant, which will mark your paper. Clear this
by punching scrap sheets of paper until clean prior to
binding.
Maintenance
Please ensure the clippings tray is emptied on a regular
basis. This may prevent your machine from overloading.
Service
WARNING: Do not attempt to service or repair the
punch. Failure to observe this warning could result in
severe personal injury or death.
Disconnect the plug from the socket outlet and contact
GBC Technical Service when one or more of the following
has occurred.
• The power supply cord or attachment plug is damaged.
• Liquid has been spilled into the punch.
• The punch is malfunctioning after being mishandled.
• The punch does not operate as described in these
instructions.
m
Bekijk gratis de handleiding van GBC W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GBC |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5422 MB |
