Gardena EasyWeed 1800/18V P4A handleiding

Niet gecategoriseerd

Gardena

166 pagina's

PDF beschikbaar

Handleiding

Wear protective gloves to avoid being injured by the weed brush.

1. Loosen the Allen screw

using an Allen key (width 4 mm) by turning

clockwise (left-hand thread).

2. Remove the Allen screw

together with the washer

from the weed

brush holder

3. Pull the weed brush

sideways from the weed brush holder

and

pull the weed brush

downwards out of the safety guard

. As you

do so, make sure that the weed brush holder

remains on the axis.

4. Slide the desired new weed brush

into the safety guard from under-

neath

and place the weed brush

onto the weed brush holder

5. Place the washer

onto the weed brush holder

6. Insert the Allen screw

into the weed brush holder

7. Tightly screw the Allen screw

into the weed brush holder

using

an Allen key (width 4 mm) by turning anticlockwise (left-hand

thread).

3. OPERATION

DANGER!

Risk of injury

If the product starts unintentionally, people can be injured by the

weed brush.

 Remove the battery before adjusting the product.

3.1. Charging the battery [Fig. O1/O2/O3]

CAUTION!

Damage to property

If the voltage of the power source does not match the specications on

the battery charger rating plate, the battery charger may be damaged.

 Note the mains voltage.

DANGER!

Risk of injury

Inserting the battery may cause you to trap your ngers.

 Mind your ngers.

The smart charging process automatically detects the battery’s state of

charge and charges it using the optimum charging current depending on

the battery temperature and battery voltage. This protects the battery and

keeps it fully charged when stored in the battery charger.

1. Press the release button

and remove the battery

from the

battery holder

2. Connect the battery charger

to a power outlet.

3. Slide the battery charger

onto the battery

When the battery charge indicator

on the battery charger is ashing

green, the battery is charging.

When the battery charge indicator

on the battery charger glows

continuously green, the battery is fully charged (charging time, see

7. TECHNICAL DATA).

4. Check the state of charge at regular intervals while charging.

5. When the battery

is fully charged, the battery can be

disconnected

from the

battery charger.

3.2. What the indicator elements mean

3.2.1 Battery charge indicator on the battery charger [Fig. O3]

Flashing battery

charge indica-

tor

The charge cycle is indicated by the battery charge indicator

ashing

Note: The charge cycle can be carried out only if the temper-

ature of the battery is within the permissible charging temper-

ature range, see 7. TECHNICAL DATA.

Battery charge

indicator shows

solid light

A solid light on the battery charge indicator

signals that

the battery is fully charged or that the temperature of the bat-

tery is outside of the permissible charging temperature range

and it cannot therefore be charged. As soon as the permissi-

ble temperature range is reached, the battery is charged.

If the battery is not inserted, a solid light on the battery

charge indicator signals

that the mains plug is inserted into

the power outlet and that the battery charger is ready for use.

 The battery can be damaged by sharp objects such as a nail or

screwdriver or by external force. An internal short circuit may occur and

the battery may burn, smoke, explode or overheat.

 Never service damaged battery packs. Service of battery packs should

only be performed by the manufacturer or authorised service providers.



Protect the battery from heat, including prolonged exposure to

sunlight, re, dirt, water and moisture.

There is a risk of explosion and short circuit.

 Operate and store the battery only at an ambient temperature between

– 20 °C and + 50 °C. Do not leave the battery in your car in the summer, for

example. At temperatures < 0 °C, performance may be reduced depending on

the device.

 Charge the battery only at an ambient temperature between 0 °C and

+ 35 °C. Charging outside of the temperature range can damage the battery

and increase the risk of re.

 After use, allow the battery to cool down for at least 30 minutes before

charging or storing it.

1.3.3. Additional electrical safety warnings

DANGER!

Risk of cardiac arrest

This product generates an electromagnetic eld while it operates.

This electromagnetic eld may aect the functionality of active or

passive medical implants (e.g. pacemakers), which may result in

serious injury or death.

 Consult your doctor and the manufacturer of your implant

before using this product.

 Remove the battery when you are not using the product.

 Do not expose the battery and battery charger to rain, water or wet conditions.

 Avoid excessive use of the product to avoid overheating the motor and battery.

 Remove the battery immediately in case of an emergency.

1.3.4. Additional personal safety warnings

DANGER!

Risk of suocation

Small parts can easily be swallowed. There is also a risk that the

polybag can suocate toddlers.

 Keep small children away when you assemble the product.

 Use only original GARDENA accessories. Unsuitable brushes can lead to an

increased risk of brushes developing faults or of ying objects.

 Use the product only when the safety guard is tted.

 Do not touch moving parts.

 Do not use the product to the point of fatigue or exhaustion.

 Always perform a short test run before use to check for possible eects on the

surfaces of the paving stones or panels.

2. ASSEMBLY

DANGER!

Risk of injury

If the product starts accidentally, people can be injured by the

weed brush.

 Remove the battery before assembling the product.

 Do not touch moving parts.

2.1. Scope of supply

Art. 14820-20 Art. 14820-55

Cordless weed brush x x

Steel wire brush x x

Battery charger x -

Battery (2 Ah) x -

Operator’s manual x x

The weed brush is supplied pre-assembled.

2.2. Replacing the brush [Fig. A1]

The GARDENA spare parts are available from your GARDENA dealer

or from GARDENA Service.

Two GARDENA Weed Brushes are available:

• GARDENA steel wire weed brush art. 14821: For heavy soiling in

joints on resistant surfaces.

• GARDENA nylon weed brush Art. 14822: For gentle cleaning on

scratch-prone surfaces.

 Only use an original GARDENA Weed Brush.

GAR_14820-20.960.02_2023-11-28.indd 12GAR_14820-20.960.02_2023-11-28.indd 12 28.11.23 13:4328.11.23 13:43

Bekijk gratis de handleiding van Gardena EasyWeed 1800/18V P4A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.