Furuno SCX-20 handleiding
Handleiding
Je bekijkt pagina 16 van 86
1. INSTALLATION
1-6
1.3.4 How to mount the Antenna Unit
1. Set the hose clamps on the pole mount kit assembly and pass the antenna cable
for NMEA 2000 through the pipe of the mast mounting kit from the underside.
Note: Make sure the anchor point of the fixing support fixture faces upward
.
2. Connect the antenna cable for NMEA 2000 to the connector of the antenna unit.
Secure the antenna unit with the three supplied M5 screws from the underside.
After fixing screws, coat the screw heads with the supplied adhesive.
3. Set the antenna unit assembly to the mount-
ing pole so that the anchor of the fixing sup-
port fixture is on the top of the mounting pole
as shown in the figure at right.
Antenna cable
(NMEA 2000)
Hose Clamp
Pole
Mount Kit
Assembly
Anchor
point
Anchor
point
Pass the antenna cable
through the cutout.
Cutout
Fixing support
fixture
Bow mark
Apply adhesive.
Antenna
unit
Connector
Mounting
pole
Mounting
pole
AnchorAnchor
Antenna unit
assembly
Bekijk gratis de handleiding van Furuno SCX-20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | SCX-20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11676 MB |
