Furuno SCX-20 handleiding
Handleiding
Je bekijkt pagina 12 van 86
1. INSTALLATION
1-2
1.2 Platform Mount
The antenna unit is mounted on a level platform, with the fixing screws inserted from
the underside of the unit.
1.2.1 Required tools
The following tools should be prepared in advance for this installation.
1.2.2 How to mount the Antenna Unit
1. Construct a suitable mounting platform, minimum size 130 mm 130 mm. If cor-
rosive material is used, take necessary anti-corrosion measures.
Note: The mounting platform must be flat, level and firmly secured.
2. Referring to the outline drawing at the back
of this manual, drill three mounting holes
(6 mm) and a cable hole for passing the
supplied antenna in the mounting platform.
The diameter of a cable hole is 25±2 mm
for SCX-20.
Note: Place the antenna unit on the plat-
form, then orient the unit so the bow mark on
its base is facing the ship’s bow.
3. Pass the antenna cable through the hole made at step 2 so the connector of the
antenna cable exits on the upper side of the mounting platform.
Name Remarks
Electrical Drill For making the mounting holes
Drill Bit 6
Hole Saw For making the cable hole (25 mm)
File For smoothing the cut edge of the cable hole
Phillips-head Screwdriver #2
Self-vulcanizing tape For waterproofing the connector
Vinyl tape For waterproofing the connector
min. 130 mm
min.
130 mm
Mounting hole (ø6 mm)
Mounting hole (ø6 mm)
Cable hole
(ø25 mm)
Cable hole
(ø25 mm)
Bow mark
Bekijk gratis de handleiding van Furuno SCX-20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | SCX-20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11676 MB |
