Furuno SCX-20 handleiding
Handleiding
Je bekijkt pagina 11 van 86
1-1
1. INSTALLATION
You can install the antenna unit as follows. See the outline drawings at the back of this
manual.
• Platform mount, fixed from bottom (section 1.2)
• Pole mount (section 1.3)
• Roof mount, fixed from top (section 1.4)
• Antenna Base mount (section 1.5, option)
Use the NMEA 2000 Antenna cable (FRU-NMEA-PMMFF-060) for installation.
1.1 Installation Considerations
When selecting a mounting location, keep in mind the following points:
• Keep the length of the antenna cable in mind when selecting a mounting location.
• Make sure the mounting location is strong enough to support the weight of the unit.
See the outline drawings at the back of the manual.
• Leave enough space around the unit for service and maintenance. See the outline
drawings at the back of this manual for minimum service clearance.
• The sensor should be separated more than three meters from Inmarsat F/FB anten-
nas. Select a location outside this transmission area.
• Do not bundle the antenna cable with radio equipment cables. When these noise
reductions are insufficient, adjust the squelch on the radio equipment.
• Select a location with no obstructions to the radio waves.
• Select a location with no local vibration or impact (including vibrations generated by
an engine or the mounting mast for this equipment) for the GPS sensor in the an-
tenna unit.
• Observe the compass safe distances (see page iii) to prevent interference to a mag-
netic compass.
How to select the installation site
The installation site must satisfy the conditions described in the antenna installation
procedure at the back of this manual (Dwg. No. C7286-Y01-*).
NOTICE
Do not apply paint, anti-corrosive sealant or contact
spray to coating or plastic parts of the equipment.
Those items contain organic solvents that can damage
coating and plastic parts, especially plastic connectors.
Bekijk gratis de handleiding van Furuno SCX-20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | SCX-20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11676 MB |
