Furuno NAVpilot-1000 handleiding
Handleiding
Je bekijkt pagina 25 van 89
1. OPERATION
1-13
1.11 Watch Alert
The watch alert periodically warns the helmsman to check the NAVpilot when in the
AUTO or NAV mode.
1. Open the user menu.
2. Select [Alert].
3. Select [Watch Alert].
4. Select [ON] or [OFF]. For [OFF], go to step 7.
5. Select the current watch alert value.
6. Set the time interval for the watch alert.
7. Close the user menu.
If the set time passes without operation, the buzzer sounds and the alert message ap-
pears. Further, if ten minutes elapses after the watch alarm has sounded, the alarm
becomes louder. Press any key to clear the alert.
1.12 Off Heading Alert
The off heading alert* (deviation alert) sounds in the AUTO and NAV modes when the
heading deviates more than the deviation alert value.
*: “Off heading alert” is a terminology defined by ISO 11674.
Note: The setting value of the off heading alert can be changed, but you cannot de-
activate this alert.
1. Open the user menu.
2. Select [Alert].
3. Select [Off Heading Alert].
4. Set the degree of deviation.
5. Close the user menu.
Bekijk gratis de handleiding van Furuno NAVpilot-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | NAVpilot-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9190 MB |
