Furuno NAVpilot-1000 handleiding
Handleiding
Je bekijkt pagina 11 van 89
ix
SYSTEM CONFIGURATION
12/24 VDC
Analog Steering System
(voltage type)
Steering System
FU Remote Controller
*
6
IEC61162-1/2, NMEA 0183 Equipment
(Heading Sensor, Navigation
Equipment, Alert Management
System, BNWAS, Other Sensor)
Max. 4 units
: Standard supply
: Option or local supply
NMEA 2000 Network
*
1
: When four or more control units are connected, connect
the power isolator to the NMEA 2000 network and provide
the external power supply to the backbone.
*
2
: Termination resistors must be installed at both ends of the
backbone.
*
3
: Available only for the non-IMO type.
*
4
: For the IMO type, power fail signal must be connected to
an external alarm system in accordance with ISO 11674.
For details of wiring, see the Installation Manual.
*
5
: HUB-100 can only be used for IEC61162-450 Ed.1
compliant network.
NMEA 2000 Equipment
*
3
(Heading Sensor, Navigation
Equipment, Other Sensor)
Power
Isolator
*1
OR
Analog Steering System
(current type)
OR
Solenoid/Relay
*
3
Bypass/Clutch
RRU (Potentiometer type)
Rudder Reference Unit
OR
RRU (Analog voltage type)
OR
RRU (Analog current type)
OR
RRU (Frequency type)
IEC61162-450 Equipment
(Navigation Equipment, Alert
Management System, BNWAS,
Other Sensor)
RMS Service Gateway
(for Maintenance)
HUB-100
*5
/
HUB-3000
Max. 3 units
Alarm System
Changeover Switch
Power Fail
*4
Changeover
Steering System
BNWAS (BR-500)
Indication System (LED)
NFU Remote Controller
*
3,
*
6
Alarm System
Contact Output
Steering System
Rudder Reference Unit
Alarm System
Steering Mode Switch
Contact Input
Processor Unit
FAP-10002
USB Flash Memory
(type A, for maintenance)
Powered by processor unit (Max. 3 units)
Requires external power (4 to 6 units)
Control Unit
*7
FAP-10001 (Max. 6 units)
9 to16 VDC
Category of units
Processor unit
Control unit
Protected from the weather.
Protected from the weather.
Termination
resistor*
2
Termination
resistor*
2
*
6
: Available only when the RRU is installed.
*
7
: If your ship does not need SOLAS certification, the
control unit can be connected directly to the
processor unit without connecting via the NMEA
2000 backbone, using the optional cable assembly
(type: FRU-LMT-18-SINGLE). For details, see the
next page.
Bekijk gratis de handleiding van Furuno NAVpilot-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | NAVpilot-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9190 MB |
