Furuno MU-152 handleiding
Handleiding
Je bekijkt pagina 4 van 44
SAFETY INSTRUCTIONS
iii
Safety Instructions for the Installer
WARNING
CAUTION
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Do not install the equipment where it
may get wet from rain or water splash.
Water in the equipment can result in fire,
electrical shock or damage to the
equipment.
Observe the following compass
safe distances to prevent
interference to a magnetic
compass:
Standard
compass
Steering
compass
MU-152 0.65 m 0.40 m
When lifting the monitor unit,
hold it together with the hard
cover.
Grasping by the hard cover alone
may allow the monitor unit to fall,
resulting in possible bodily injury or
damage to the equipment.
• The TFT LCD is constructed using the latest LCD techniques, and displays
99.99% of its pixels. The remaining 0.01% of the pixels may drop out or
blink, however this is not an indication of malfunction.
About the TFT LCDAbout the TFT LCD
• The MU-152 is non-bonding monitor unit, so the dew condensation may
occur depending on the ambient temperature.
This equipment is intended to
enhance safe operation of the
vessel. Install it on the bridge or
captain’s quarters where access is
limited to few personnel (captain,
navigator).
Bekijk gratis de handleiding van Furuno MU-152, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | MU-152 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5968 MB |
