Furuno MU-152 handleiding
Handleiding
Je bekijkt pagina 27 van 44
3. OPERATION
19
3.3 How to Adjust the Display Brilliance
You can adjust the display brilliance as follows:
Note: This function is available when [AUTO DIMMER] and [EXT BRILL CTRL] on the [SYSTEM]
menu are set to [OFF]. See section 3.6.1.
1. Press the /BRILL key momentarily to show the BRILL
adjustment window. The window closes automatically
when there is no operation for five seconds.
2. Press the W or X key to adjust the brilliance. You can also adjust the brilliance by pressing
the /BRILL key repeatedly. The setting range is 1 to 50 (default: 50).
3. Press the S or T key to close the window.
Note 1: If you turn off the monitor unit with the minimum brilliance, it may be difficult to see the
screen when you next turn the power on, due to ambient light. In this case, press the /BRILL
key repeatedly.
Note 2: When connecting the MU-152 to the FAR-15x3/15x8, FAR-1417/1427 or FCV-1900, you
can adjust the display brilliance from the equipment’s control unit. See section 3.6.2.
3.4 How to Select the Source for Main Picture
Select the signal to display on the entire screen as follows:
1. Press the DISP key to show the DISP selection window. The signal names are
shown as customized at section 2.3.2 on the window. The window closes auto-
matically when there is no operation for five seconds.
2. Press the S or T key to select a signal. You can also select the signal by press-
ing the DISP key continuously.
[RGB]: The signal from the RGB port is displayed.
[DVI1], [DVI2]: The signal from the selected DVI port is displayed.
[VIDEO1] to [VIDEO3]: The external video from the selected VIDEO port is displayed.
3. Press the W or X key to close the window. The name of the selected signal appears at the
top right of the screen for five seconds after the DISP selection window disappears. If there is
no signal, "NO SIGNAL" appears.
3.5 How to Display the PIP Window
The PIP (picture-in-picture) window,
which displays the picture input to the
VIDEO port, is available on the RGB,
DVI1 and DVI2 displays.
BRILL 45
RGB
DVI1
DVI2
VIDEO1
VIDEO2
VIDEO3
PIP window
Bekijk gratis de handleiding van Furuno MU-152, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | MU-152 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5968 MB |
