Furuno MU-152 handleiding
Handleiding
Je bekijkt pagina 10 van 44
1. MOUNTING, WIRING
2
Required tools
The following tools should be prepared in advance for this installation.
How to remove/attach the hard cover
Before you install this monitor unit, remove the hard cover as follows.
How to remove the hard cover
To attach the hard cover, follow the illustration in the figure below.
How to attach the hard cover
Cable connection
Before you install the monitor unit, run and connect all cables you use. See the interconnection
diagram at the back of this manual.
• Electrical drill, Hole saw: φ18 mm, for making the mounting holes
• Jig saw, File: For making the mounting holes
• Phillips-head screw driver: #2, for securing the flush mount fixtures
• Cable tie: For securing the cables
Pull the upper
edge forward
while pressing
here with your
thumbs.
The upper edge of the hard cover
Grasping by the hard cover alone
may allow the monitor unit to fall,
resulting in possible bodily injury or
damage to the equipment.
When lifting the monitor unit, hold
it together with the hard cover.
CAUTION
Set the tabs on the top
of the hard cover to the
cutouts of the monitor
unit.
Push the tabs on the
bottom of the hard cover
strongly (2 places).
Hard cover
Tab
CutoutCutout
Bekijk gratis de handleiding van Furuno MU-152, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | MU-152 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5968 MB |
