Furuno FM-8900S handleiding
Handleiding
Je bekijkt pagina 109 van 151
7-1
7. MAINTENANCE &
TROUBLESHOOTING
7.1 Daily Test
Do the daily test to check the radiotelephone for proper operation.
Rotate the CHANNEL/ENTER knob to select [TEST] on the [MENU] screen then push
the knob. The daily test starts. After the test is completed, the audio alarm sounds and
the screen shown below appears. This screen shows:
• Test date
• Program version number
• Test results for TX power, TX PLL, RX PLL, DSC PLL, DSC LOOPBACK, DSC
ROUTINE, ROM, RAM, RTC, DSP, FPGA and alarm unit (only when connecting the
alarm unit), shown as [OK] or [NG] (No Good). For NG, contact your dealer for ad-
vice. The DSC ROUTINE test checks, using a DSC signal, the encode and decode
functions of the signal processor.
To print out the test result manually, press the 5 key. Automatic printing of the daily
test is available. See section 5.5.
Do not apply paint, anti-corrosive sealant
or contact spray to plastic parts or
equipment coating.
Those items contain products that can
damage plastic parts and equipment coating.
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel
should work inside the
equipment.
WARNINGWARNING
NOTICE
This item is not available
when not connecting the
alarm unit.
These items are not
available when own ship’s
MMSI is not entered.
If the displayed value
greatly increases compared
with the previous value, the
antenna may be damaged.
Refer to section 7.2 for
maintenance guidance.
Bekijk gratis de handleiding van Furuno FM-8900S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | FM-8900S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18955 MB |
