Furuno CI-88 handleiding
Handleiding
Je bekijkt pagina 37 van 75
3. CUSTOMIZING THE SYSTEM
3-3
3.2 Function Keys
3.2.1 Programming the function keys
The function keys ([F1]-[F3]) provide menu shortcut operation. You may program the
keys as follows:
1. Press the MENU key to display the main menu.
2. Choose menu desired.
Note: The ALARM and INSTALLATION menus cannot be used.
3. Choose menu item desired.
Note: RESET TRIP LOG, TEST and BOTTOM SEARCH in the MENU 1 cannot
be used.
4. Press and hold down a function key until you hear three beeps and the message
“PROGRAMMED SELECTED ITEM TO [F*] KEY” is displayed (about five sec-
onds). (* Function key number pressed.)
5. Press the MENU key to close the menu.
3.2.2 Using the function keys
The function keys provide shortcut menu operation, and they are not programmed at
the factory. If a function key contains no program when pressed, the message “NO
FUNCTION ASSIGNED TO [F*] KEY” appears on the display for about five seconds.
(* function key pressed.)
1. Press any function key. An appropriate setting window appears on the display.
2. Within five seconds after completing step 1, operate the CursorPad to change set-
ting as below.
Change numeric data: or to raise the setting; or to lower it.
Choose option: or to scroll rightward; or to scroll leftward.
Bekijk gratis de handleiding van Furuno CI-88, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | CI-88 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7018 MB |
