Furuno CI-68 handleiding
Handleiding
Je bekijkt pagina 28 van 67
2. INTERPRETING THE DISPLAYS
2-6
Drift angle*
The angle measured in degrees between ship’s heading and the actual movement.
When drift angle is to port, a red “” appears and when it is to starboard a green “”
appears. In the NAV mode, drift in water tracking speed is shown.
Trip
Shows trip distance. The distance is referenced to the setting of [LOG PULSE OUT]
in the [I/O] sub menu. See the installation manual for the details.
Own ship vector*
The own ship vector shows port-starboard speed on the x-axis and fore-aft speed on
the y-axis. The synthesized speed vector (green) appears when [SCALE SYNC] on
the [DISP 2] sub menu is set to [ON].
Fore-aft speed history graph
This graph shows fore-aft speed history over time, which is useful in trawling. [HISTO-
RY] in the [DISP 2] sub menu sets the maximum range for the graph, and you can shift
the range with [HISTORY SHIFT] in the [DISP 2] sub menu. The latest 60 seconds of
fore-aft speed is shown, scrolling from right to left across the screen so the right edge
of the graph displays the latest data.
Port-starboard history graph
This graph shows port-starboard speed history over time, which is useful in trawling.
[DRIFT HISTORY] in the [DISP 2] sub menu sets the maximum range for the graph.
The latest 60 seconds of port-starboard speed is shown, scrolling from top to bottom
on the screen so the upper edge of the graph displays the latest data.
*: Speed used for calculation depends on setting of [SHIP SPD MODE] in the [DISP
1] sub menu. See "SHIP SPD MODE" on page 3-7.
Bekijk gratis de handleiding van Furuno CI-68, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | CI-68 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6831 MB |
