Furuno CH-500 handleiding
Handleiding
Je bekijkt pagina 79 van 113
5. MENU OPERATIONS
5-7
5.7 How to Adjust the Preset Range Settings
The Range Settings menu contains the range presets. You can change the presets to
suit your requirements as follows:
1. Referring to section 5.5, open the [System] menu.
2. Press to select [Range Settings], then press to open the [Range Settings]
menu.
The available setting range for each mode is shown at the top-right of the menu
window.
3. Press or to select the mode for which to change the preset range. The se-
lected mode is highlighted in a manner similar to that indicated in the above figure.
4. Press or to select the preset number to change.
5. Press to increase the range or to decrease the range.
The range changes in five meter increments between 10 m and 100 m. Between
100 m and the maximum range, the range changes in ten meter increments.
6. Press the MENU key several times to close the menu.
How to restore the default range presets
You can restore the default preset ranges for each mode individually.
1. Referring to section 5.5, open the [System] menu.
2. Press to select [Range Settings], then press to open the [Range Settings]
menu.
3. Press to select [Restore Default Settings], then press . A confirmation window
appears.
4. Press to select [Yes], then press the MENU key.
To cancel the procedure, select [No], then press the MENU key.
Range Settings
Menu
HOR.
VERT ES
: Select
: Change Menu: Apply
1
2
3
4
5
6
7
8
9
1 0
1 0
(
10~2400m
)
2 0
4 0
6 0
8 0
1 0 0
1 2 0
1 6 0
2 0 0
2 5 0
3 0 0
4 0 0
5 0 0
6 0 0
1 1
1 2
1 3
1 4
1 5
Restore Default Settings
No
Yes
Setting
range
available
Selected
mode
1 0 0 0
Bekijk gratis de handleiding van Furuno CH-500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | CH-500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15432 MB |
