Furman SmartSequencer CN-1800S handleiding

Niet gecategoriseerd

Furman

16 pagina's

PDF beschikbaar

Handleiding

Remote Access (and BlueBOLT®)

If so desired, the CN-1800S can be controlled remotely via an integral

RS-232 data-link and command protocol. The remote access feature

delivers integration with various control systems. The protocol set

provides over a dozen commands such as reset, disable, and sequence

and includes queries such as voltage, current, and power. Our optional

BlueBOLT® RS-232-to-Ethernet adaptor (available Q4, 2012) provides

additional control programming and monitoring from any Web-enabled

device via Telnet, direct HTTP connection, or www.mybluebolt.com

Important Safety Instructions

1. Please read and follow all instructions.

2. Please keep these instructions.

3. Please heed all warnings.

4. WARNING: This device is intended for indoor use only. Do not use

this device near water. To Reduce the risk of ﬁre or electric shock, do not

expose this device to rain or moisture.

5. CAUTION: Always On receptacles are present, providing constant

AC power. To Reduce risk of shock, please disconnect the CN-1800S /

CN-2400S Sequencer from AC power before servicing any equipment

connected to the CN-1800S / CN-2400S Sequencer.

6. Clean only with dry cloth.

7. CAUTION: Do not install near any heat sources such as radiators, heat

registers, stoves, or other equipment that may produce heat.

8. Protect the power cord from being walked on or pinched, particularly at

plugs, convenience receptacles, and the point where they exit the device.

9. WARNING: The DB-9 RS-232 communications port provides power for

Furman accessories (e.g. BB-RS232). Please verify pin assignment and

protocol before connecting any other manufacturer’s device to this port.

10. Please, only use accessories speciﬁed by the manufacturer.

11. Refer all servicing to qualiﬁed personnel. Servicing is required when

the unit has been damaged in anyway or fails to operate.

12. WARNING: Do not use power cord as the main power disconnect.

The device is intended for AC power sequencing.

13. Do not defeat the safety purpose of the polarized plug. A polarized

plug has two blades, with one wider than the other. The wide blade is

provided for your safety. If the provided plug does not ﬁt into your outlet,

consult an electrician for replacement of the obsolete outlet.

14. Do not defeat the safety purpose of the grounding prong. A ground

type plug has two blades and a third grounding prong. The third prong is

provided for your safety. If the provided plug does not ﬁt into your outlet,

consult an electrician for replacement of the obsolete outlet.

15. WARNING: This device must be connected to an AC outlet with a

protective earth ground connection.

Security and Safety

The CN1800S is adaptable to most common installation requests and

requirements. An ON/OFF key switch prevents operation from unau-

thorized personnel and removable security covers help to discourage

tampering. The RS-232 DE-9 communications port can be defeated by

the key switch. Furthermore, there are Forced Off inputs and selectable

DIP Switch settings for connecting to alarm systems, thus providing an

immediate power shutdown in compliance with many ﬁre ordinances. The

combinations of features cover many needs for a wide variety of client

concerns.

Additional Features

The CN1800S Power Sequencer is equipped with eight 120V rear panel

outlets on four duplexes and a single front panel convenience outlet,

all ﬁltered and protected with Furman technology. The unit has three

unswitched outlets that provide constant power under safe utility condi-

tions. Rear panel outlets are divided into four banks: one bank with two

unswitched outlets and three banks are sequenced at two outlets per

bank. A related dry contact is coupled with the “Delay Bank 3” bank; to-

gether both can offer a delay up to seven minutes. Features also include

10 LED indicators to aid in tracking conditions such as power, protection,

sequencing and communication. And naturally, the CN-1800S Contractor

Series 1800 Watt 15 Amp capacity is supplied by a robust 14 AWG, 10

foot AC cord.

All Contractor Series units and features are backed by a 15 year Limited

Warranty.

Bekijk gratis de handleiding van Furman SmartSequencer CN-1800S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.