Full Boar FBAS-010 handleiding
Handleiding
Je bekijkt pagina 15 van 17
15
KNOW YOUR PRODUCT
General Cleaning
• If the enclosure of the tool requires cleaning, do not use solvents but a moist
soft cloth only. Never let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
• Store the tool in a dry and safe place out of reach of children.
• Oil the air tool after each use with air tool oil.
Note: TB Imports will not be responsible for any damage or injuries caused by the
repair of the tool by an unauthorised person or by mishandling of the tool.
Spare Parts
Limited spare parts are available subject to availability. Please contact your local
Bunnings Special Orders Desk to order the required spare parts.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE REMEDY
Air leak near the top of
the tool or in the trigger
area.
Loose screws Tighten screws
Warn or damaged
o-rings or seals
Check and replace
O-rings
Air leak near the base of
the tool
Loose screws Tighten screws
Warn or damages
o-rings or seals
Check and replace
O-rings
Tool does nothing or
operates sluggishly
Insufficient air supply Increase air flow to tool
(Do not exceed 150psi)
Insufficient lubrication Lubricate tool
Worn or damaged
o-rings
Check and replace
O-rings
Air Saw does is not
cutting material.
Insufficient air supply Increase air flow to tool
(Do not exceed 150psi)
MAINTENANCE
Bekijk gratis de handleiding van Full Boar FBAS-010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Full Boar |
| Model | FBAS-010 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2332 MB |
