Fulgor Milano F4MGK24S1 handleiding
Handleiding
Je bekijkt pagina 15 van 72
EN
11
Gas Connection
• Thread the appliances pressure regulator with 1/2” male end
connection both supplied with this appliance.
• Make the gas connection to the inlet of the pressure regulator
with 1/2” male pipe threads.
• Join the pressure regulator to the entrance threads of the Gas
Manifold with gasket supplied with this appliance. The regulator
is marked with a directional arrow indicating correct direction
of gas flow. Ensure the appliance regulator is installed with the
arrow pointing toward the gas manifold entrance and make sure
the top of the regulator is facing towards the cabinet front, easily
accessible through the cabinet doors.
• Connect a manual shut-off valve to the gas supply in an
accessible location for turning on or shutting off gas to the
appliance.
• Install a coupling between the regulator and the shutoff valve to
complete the connection.
• Assure all pipe joint connections are gas tight.
• Check alignment of valves after connecting the cooktop to the
gas supply to be sure the manifold pipe has not been moved.
• A misalignment could cause the valve knob stem to rub on the
control panel, resulting in a gas leak at the valve.
If an oven is to be installed below this appliance connect gas supply
line as shown in figure consider the below cabinet clearance.
2-1/2” (6.3 cm)
Hole diameter
1-1/8” (3cm)
Cabinet Sides
90° street
elbow
Cabinet Sides
ILLUSTRATIVE GAS SUPPLY PIPING
(NO OTHER APPLIANCE BELOW
COOKTOP)
GAS
BURNER BOX
(REAR OF APPLIANCE)
APPLIANCE
PRESSURE
REGULATOR
ALL PIPE JOINTS
1/2" N.P.T.
MANIFOLD
SHUTOFF
VALVES
Bekijk gratis de handleiding van Fulgor Milano F4MGK24S1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fulgor Milano |
| Model | F4MGK24S1 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9846 MB |
