Frigidaire GMOS1266SS handleiding
Handleiding
Je bekijkt pagina 15 van 72
Installation Instructions
EXTERNAL EXHAUST DUCTING
OUTSIDE TOP EXHAUST (EXAMPLE ONLY)
The following chart describes an example of one possible ductwork installation.
OUTSIDE BACK EXHAUST (EXAMPLE ONLY)
The following chart describes an example of one possible ductwork installation.
DUCT PIECES
EQUIVALENT
LENGTH
x
NUMBER
USED
=
EQUIVALENT
LENGTH
Roof Cap 24 Ft. (7.3 m) x ( 1 ) = 24 Ft. (7.3 m)
12 Ft. (3.6 m)
Straight Duct
(6”/15.2 cm
Round)
12 Ft. (3.6 m) x ( 1 ) = 12 Ft. (3.6 m)
Rectangular-
to-Round
Transition
Adaptor*
5 Ft. (1.5 m) x ( 1 ) = 5 Ft. (1.5 m)
Equivalent lengths of duct pieces are based on actual
tests and reflect requirements for good venting
performance with any vent hood.
Total
Length
41 Ft. (12.5 m)
* IMPORTANT: If a rectangular-to-round transition adaptor is used, the bottom corners of
the damper will have to be cut to t, using the tin snips, in order to allow free movement of
the damper.
DUCT PIECES
EQUIVALENT
LENGTH
x
NUMBER
USED
=
EQUIVALENT
LENGTH
Wall Cap 40 Ft. (12.2 m) x ( 1 ) = 40 Ft. (12.2 m)
3 Ft. Straight
Duct
(31⁄4” x
10”/8.2 x
25.4 cm
Rectangular)
3 Ft. (0.9 m) x ( 1 ) = 3 Ft. (0.9 m)
90° Elbow 10 Ft. (3 m) x ( 1 ) = 20 Ft. (6.1 m)
Equivalent lengths of duct pieces are based on actual
tests and reflect requirements for good venting
performance with any vent hood.
Total
Length
63 Ft. (19.2 m)
NOTE: For back exhaust, care should be taken to align exhaust with space between studs,
or wall should be prepared at the time it is constructed by leaving enough space between
the wall studs to accommodate exhaust.
EN-14
Bekijk gratis de handleiding van Frigidaire GMOS1266SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | GMOS1266SS |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 11447 MB |
