Frigidaire GHPC142AA1 handleiding
Handleiding
Je bekijkt pagina 14 van 32
14 INSTALLATION INSTRUCTIONS
Install the clamp plate into the window slider
kit from the back as shown below.
Slide in from here
Window slider kit can be installed in a
double-hung sash window or a sliding sash
window with a dimension of 22.8” to 42.7”.
The hose can be extended from its original
length of 15" up to 59" but try to maintain the
minimum required length. Also make sure
that the hose does not have any sharp bends
or sags.
Select a suitable window.
If the window’s width/Height is between 32”
to 42.7”, take out the telescopic panel and
install the telescopic panel extender.
Vertical
window
Window Slider Kit
Minimum:22.8(58cm)
Maxmum:42.7(108cm)
Horizontal
window
Window Slider Kit
Minimum:22.8(58cm)
Maxmum:42.7(108cm)
Install the interface panel into the main panel
of window slider kit. It can be installed from
both ends of the interface panel. Choose
according to the actual need.
After the interface panel is installed correctly,
tab A should be fixed in the lower left corner
or upper right corner as shown.
To release the interface panel press down tab
A and pull out.
Interface panel
Main panel
Tab A
Connect telescopic panel and extender
panel with panel connector.
Reinstall the extended telescopic panel.
Slide out the telescopic panel.
No sharp bends or sags.
Bekijk gratis de handleiding van Frigidaire GHPC142AA1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | GHPC142AA1 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3188 MB |
