Frigidaire GDSP4735AF handleiding
Handleiding
Je bekijkt pagina 7 van 28
rinse to 157°F (69°C) and maintains that
temperature for 7 min.
The cycle time is extended until the
proper water temperature is reached, and
washing continues during the water
heating delay. For best results, the
incoming water temperature should be at
least 120°F (49°C). Wash time is about
208 min. with AIR DRY, and with Medium
Dry, and 212 min. with MAXBOOST.
The sanitation criteria may not be
satisfied if there is an interruption of the
cycle, a power failure occurs, or if
incoming water temperature is below
120°F (49°C).
When a sanitized cycle has completed,
the SANITIZE LED is illuminated if NSF
req. for sanitization are reached. The LED
stays on after the door is opened.
If NSF requirements for sanitization are
NOT reached the LED is off at cycle end.
The LED starts blinks twice then goes out
after the door is opened.
8
AIR DRY
If the AIR DRY option is selected, the
heating element is not used during the
dry cycle. This reduces energy
consumption and drying performance.
Items in the dish load may not be dry at
the end of the cycle.
9
Selecting a Dry Setting
Touch and slide to select a dry setting
based on the touch release point.
Updates to the cycle time display in the
status window. Releasing the slide input
between dry programs selects the
Medium Dry program.
10
MAXBOOST
The cycle time increases when
MAXBOOST is selected.
NOTE
If the selected dry setting is
unavailable for the selected wash
cycle, The LED above the dry option
blinks three times and then turns off
indicating that the dry option was not
selected.
11
DELAY
The DELAY option allows you to
automatically delay starting your
dishwasher from 1-12 hours.
Select your desired cycle and options,
then press the DELAY button to advance
the delay time in one-hour increments
until desired time delay is reached.
Pressing the DELAY button displays the
delayed time in the status window and
illuminates the LED above the DELAY
button to indicate a delay is active. The
delay time function is canceled if the
delay time button is pressed again when
12 hours of the selected delay time.
Press and hold the DELAY button to
quickly cycle through the delay time from
1-12 hours. Press START and close the
door immediately (within 4 seconds). A
tone indicating that countdown has
started sounds while the Close Door
LEDs blink. The selected cycle starts
when the countdown is completed. If the
cycle was not yet started, to cancel a
delay time press the DELAY button until
the time returns to zero. If the cycle has
started pressing the CANCEL button
resets both the cycle and the delay
options.
When a time delay is set for an hour or
more and the wash hasn't started, the
remaining delay time counts down on the
display in full hour increments.
When the delay time is less than 1h, the
remaining delay time counts down in hour
and min (0:59), and the delay LED is
illuminated during the delay countdown.
12
Status Window
The status window indicates the number
of delay start hours, the number of
minutes left in a cycle, the level of rinse
aid dosage, and the cycle prompts.
13
START
The LEDs of the selected cycle and
options are illuminated when the cycle
and options are selected. The status
window displays the cycle time and the
START LED blinks.
Press START and close the dishwasher
door immediately (within 4 seconds) to
start the cycle.
Once the START button is pressed the
corresponding LED stops blinking and
stays on. The CLOSE LED blinks and a
reminder tone sounds every 30 seconds
until START or CANCEL is pressed or if
ENGLISH 7
Bekijk gratis de handleiding van Frigidaire GDSP4735AF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | GDSP4735AF |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 2732 MB |
