Frigidaire GDSP4735AF handleiding
Handleiding
Je bekijkt pagina 19 van 28
6. SAVING ENERGY
6.1 Energy use
The yellow energy guide label that came on
your unit tells how much energy it would use
in one year and how it compares to others
that are available. The energy is based on the
NORMAL cycle response to tests that apply
soils and dishware that simulate the average
use. Eight place settings of dishware and
some serving pieces are used during the test.
The total energy is based on running the
average number of cycles per year, applying
typical soil levels to the dishware and half the
time, selecting the option of using extra
energy to more fully dry the dishware. Actual
energy and water use depend upon the cycle
and options you select.
This unit uses an in-line water heating
element that is located under the tub. There
is no exposed heater that plasticware might
come in contact with or that is accessible to
touch. The heat is taken to the dishware
through the heated water. For this reason,
plastic dishware may be placed where it best
fits in either the top or bottom rack.
Temperatures are uniform throughout the
dishwasher.
If the user prefers to save energy and dry the
dishes by hand they select the AIR DRY
option. If you prefer to spend slightly more
energy to get the dishes drier select one of
the heated dry options. In response the wash
and rinse temperatures in the cycle increase.
This aids cleaning and also heats the
dishwasher. When all standing water is
removed in the final drain, the extra heat
stored in the dishware acts to evaporate the
remaining water.
In general, more energy is used when more
water and heat are used in a cycle. Several
cycles, such as the NORMAL cycle, change
based on soil level, options selected, and
ambient conditions. The NORMAL cycle is
good for all around use. Other cycles are
focused toward special use like the HEAVY
cycle that is designed for heavily solid
cookware.
6.2 DishSense™ technology
Your unit has DishSense™ Technology that
works to sense how heavily soiled the dish
load is so the cycle is automatically adjusted
to the appropriate response. This helps to
prevent energy waste. The sensor is
calibrated at the end of each cycle. and
assures a clean load.
NOTE
For the first cycle after power is applied
(when first installed or after a power
failure) the sensor is not calibrated and
cannot determine the soil load.
Therefore, the unit provides a response
suitable for heavily soiled dishes on the
first run after power is restored. Energy
use during this first run may be higher
than would be typical.
7. NORMAL OPERATING SOUNDS
7.1 Normal operating sounds
Your dishwasher uses energy efficient motors
for the wash and drain portions of the cycle
you select. Each cycle has a series of water
fills and drains for washing and rinsing
dishes. As each cycle begins, you may or
may not hear the drain motor. You may also
hear the splashing of water as it enters the
tub and the spray arms as they rotate and
circulate water. The wash motor often
pulsates throughout the cycle, which varies
water pressure and optimizes performance.
7.2 Normal operating lights
Your dishwasher buttons light up when the
cycle and option are selected. All cycle and
option buttons have an LED that lights white
when selected. Deselected buttons are
turned off when the control lock is active.
ENGLISH 19
Bekijk gratis de handleiding van Frigidaire GDSP4735AF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | GDSP4735AF |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 2732 MB |
