Frigidaire FRMS2733AV handleiding
Handleiding
Je bekijkt pagina 14 van 48
6.2 You will need
• Basic tools: adjustable wrench, flat-
blade screwdriver, and Phillips™
screwdriver.
• Access to a household cold water line
with water pressure between 30 and
100 psi.
• A water supply line made of 1/4" (6.4
mm) OD, copper or stainless steel
tubing. To determine the length of
tubing needed, measure the distance
from the ice maker inlet valve at the
back of the appliance to your cold
water pipe. Then add approximately 6 ft
(1.8 m) to ensure you can move the
appliance for cleaning.
• A shutoff valve to connect the water
supply line to your household water
system. Do not use a self-piercing type
shutoff valve.
• Do not reuse compression fitting or use
thread seal tape.
• A compression nut and ferrule (sleeve)
for connecting a copper water supply
line to the ice maker inlet valve.
NOTE
Check with your local building
authority for recommendations on
water lines and associated materials
prior to installing your new refrigerator.
Depending on your local/state building
codes, Frigidaire recommends:
• for homes with existing valves its
Smart Choice® water line kit
5304437642 with a 6 ft stainless
steel water line.
Please refer to Frigidaire.com for
more information.
6.3 Installing the Water Supply
Line
IMPORTANT
Your appliance water supply system
includes several tubing lines, a water
filter, and a water valve. To ensure
that your water dispenser works
properly, this system must be
completely filled with water when your
appliance is first connected to the
household water supply line.
Connection to household water supply
with 1/4" compression fitting
A
B
A. Water inlet fitting
B. Plastic tubing to water valve
6 ft (1.8 meters) Stainless Steel water
line from household water supply line
Water inlet brass fitting
B
C
A
A. Plastic cap
B. Remove plastic cap from water inlet
fitting
C. 1/4" plastic tube to water valve
To connect water tube to household water
supply:
1. Disconnect refrigerator from electric
power source.
2. Place end of water supply line into sink
or bucket. Turn on water supply and
flush supply line until water is clear.
Turn off water supply at shutoff valve.
14 ENGLISH
Bekijk gratis de handleiding van Frigidaire FRMS2733AV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | FRMS2733AV |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5107 MB |
