Frigidaire FHPH142AA1 handleiding
Handleiding
Je bekijkt pagina 21 van 32

21OPERATING INSTRUCTIONS
Dust filter reset
This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient
operation.
The “Dust Filter” indicator will illuminate after 250 hours of fan operation. Press and hold the
“Fan” button for 3 seconds to reset, after cleaning the filter.
RH%
°C
°F
Heat
Fan
Dry
Cool
Auto
How to delay shutdown
You can delay shutdown when the unit is on. Press the “timer” button, when the unit is on. The
Timer button will be activated, the screen will display “00” and "Timer indicator" will flash.
Press the " - " or " + " to change delay start timer at 0.5 hour increments up to 10 hours, then
at 1 hour increments up to 24 hours. After 5 seconds, the timer function is enabled, then
“Timer indicator” will stop flashing, the display will back to original status. The unit will turn
off.
To cancel the setting, press the “timer” button again. You can also cancel the setting by
pressing the “ ” button.
RH%
°C
°F
Heat
Fan
Dry
Cool
Auto
PureAir
TM
filter indicator
This feature is a reminder to replace the PureAir
TM
Filter(sold separately) for more efficient
operation.
If the PureAir
TM
filter(sold separately) is installed, the “PureAir
TM
Filter” indicator will illuminate
after service life of the PureAir
TM
Filter end. Press and hold the “Fan” button for 3 seconds to
reset, after replacing the advanced filter.
Note: If both dust filter indicator and PureAir
TM
filter indicator illuminate, Long press the Fan
button will reset the dust filter indicator first. Do it again to reset PureAir
TM
filter indicator.
RH%
°C
°F
Heat
Fan
Dry
Cool
Auto
Bekijk gratis de handleiding van Frigidaire FHPH142AA1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Frigidaire |
Model | FHPH142AA1 |
Categorie | Airco |
Taal | Nederlands |
Grootte | 3022 MB |