Frigidaire FCRC3012BW handleiding
Handleiding
Je bekijkt pagina 14 van 16
Occurrence Possible cause Solution
Entire appliance does not operate. Appliance not connected. Make sure power cord is plugged properly into outlet. Check your fuse box or breaker box
to make sure the circuit is active.
Electrical power outage. Check the house light to be sure. Call your local electric company for service outage infor‐
mation.
Oven Problems
Occurrence Possible cause Solution
Poor baking results. Many factors affect baking results. Use proper oven rack position. Center food in the oven and space pans to allow air to cir‐
culate. Preheat the oven to the set temperature before placing food in the oven. Adjust the
temperature and baking time recommended in the recipe.
Flames inside oven or smoking from
oven vent.
Excessive spills in oven.
Grease of food spilled onto the oven bot‐
tom or oven cavity.
Wipe up excessive spills before turning on the oven.
If flames or excessive smoke are present when using broil, refer to Setting Oven Controls.
Oven smokes excessively when boil‐
ing.
Incorrect setting. Refer to Setting Oven Controls.
Meat to close to the broil element or burn‐
er.
Reposition the broil pan to provide proper clearance between the meat and broil element
or burner. Remove excess fat from meat. Cut remaining fatty edges to prevent curling, do
not cut into lean.
Grease build up on oven surfaces. Regular cleaning is necessary when you broil frequently. Grease or food splatters cause
excessive smoking.
Oven control panel beeps and dis‐
plays any F or E code error.
Oven control detected a fault or error con‐
dition.
To clear the error press the OFF key on the control panel. Once you clear the error code,
try the bake or broil function. If the F or E code error repeats, turn off the power to the ap‐
pliance and wait 5 minutes, and then repower the appliance. Set the clock with the correct
time of day, and try the bake or broil function again. If the fault recurs, press the OFF key
to clear.
Oven portion of appliance does not
operate.
The regulator gas is OFF. Make sure the regulator gas is turned ON. Refer to Installation Instructions.
The time of day is not set. The clock must be set in order to operate the oven. Refer to Setting Oven Controls.
Desired function is not set. Make sure the oven controls are set properly for the desired function. Refer to Setting
Oven Controls and this checklist.
Cooktop Problems
Occurrence Possible cause Solution
Surface element is too hot or not hot
enough.
Incorrect surface control setting. Adjust power level setting.
Surface element does not heat or
does not heat evenly.
Incorrect surface control knob is used for
the element needed.
Make sure that you use correct surface control knob for the element needed.
Cookware is light weight or warped. Use only flat, evenly balanced, medium or heavyweight cookware. Lightweight pans heat
unevenly and food may burn easily.
Drip bowls are pitting or rusting. Foods with acids, such as tomatoes, will
cause corrosion if allowed to stand in/on
bowls.
When cool, remove and wash drip bowls as soon as possible after a spill.
This is normal. Houses located along sea coasts are exposed to salt air. Protect bowls as
much as possible from direct exposure to salt air.
Drip bowls have changing or distort‐
ing colors.
Bottom of hot cookware extends beyond
surface element and touches cooktop sur‐
face, causing the drip bowl to discolor.
Pan size should match the size of the surface element.
Replacement drip bowls may be purchased from your appliance dealer.
Other Problems
Occurrence Possible cause Solution
Appliance is not level. Poor installation. Place the oven rack in the center of the oven. Place a level on the oven rack. Adjust the
leveling legs at the base of the appliance until the rack is level.
Kitchen cabinet alignment may make
range appear not level.
Make sure cabinets are square and have sufficient room for appliance clearance.
Appliance is not level. The floor is sagging or sloping. Make sure the floor is level, strong, and stable enough to adequately support the range.
Contact a carpenter to resolve the situation.
Cannot move appliance easily. Appli‐
ance must be accessible for service.
Cabinets not square or built in too tightly.
Carpet interferes with appliance.
Contact the builder or installer to make the appliance accessible.
Provide sufficient space so the appliance can be lifted over carpet. Installation over carpet
is not advised. Refer to Installation Instructions for guidelines specific to your appliance.
Oven light does not work. The oven light is not secured in the socket. Make sure the oven light is secure in the socket. Refer to Care and Cleaning.
9. LIMITED WARRANTY
Your appliance is covered by a one year limited warranty. For one year
from your original date of purchase, Electrolux will pay all costs for
repairing or replacing any parts of this appliance that prove to be
defective in materials or workmanship when such appliance is installed,
used and maintained in accordance with the provided instructions.
Exclusions
14 ENGLISH
Bekijk gratis de handleiding van Frigidaire FCRC3012BW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | FCRC3012BW |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1843 MB |
