Frigidaire FCFI3083SS handleiding
Handleiding
Je bekijkt pagina 20 van 45
20
SETTING SURFACE CONTROLS
Setting induction cooking zones
To operate an induction cooking zone:
1. Turn the cooktop on by pressing the Power key.
2. Place correctly sized cookware on the cooking
zone. The Power Level Indicator for the cooking
zone will show “--”.
3. Press the On-Off key for the active cooking zone.
The Power Level Indicator for the cooking zone
will show “0”.
4. Set the cooking zone to the desired level (refer to
Table 1) by pressing + or - until the desired cooking
level is shown.
5. When cooking is complete, turn the induction
cooking zone OFF by pressing its On-Off key or
the Power key before removing the cookware. If all
of the zones are off , the cooktop will automatically
power off in 30 seconds.
At any time, you can change the setting for an active
cook zone by setting the number to the new setting.
IMPORTANT
Do not leave empty cookware on an operating
cooking zone. Cookware will heat very quickly and
may be damaged or warped if left on the cooking
zone empty.
NOTE
A cooking zone will not become active without
proper cookware in position. See “Pan Sensing” on
page 15.
If the cooktop does not detect cookware within 30
seconds, it will turn off .
Suggested induction cooking zone settings
Start most cooking operations on a higher setting and
then turn to a lower setting to fi nish cooking.
The suggested settings found in Table 1 below are
based on cooking with medium-weight stainless steel
pans with lids. Settings may vary when using other
types of pans.
Electrolux Induction Recommendations
Temp
Range
Power
Level
Description
Keep Warm
145°-160°F
Low 1 Keep foods warm
Simmer 185 - 200°F
Medium
Low
2-4 Continue cooking,
poach, stew
Medium 5-6 Maintain a slow boil,
thicken sauces and
gravies, steaming,
cooking
Medium
High
7-8 Continue a rapid boil,
fry, or deep fry
High 9 Start most foods,
maintain water at a
boil, pan cooking,
searing
Power
Boil
P Start heating pans
that contain large
amounts of food or
to bring pots of water
to boil
Table 1: Suggested induction cooking zone settings
NOTE:
• The size and type of the cookware used and the
amount and type of food being cooked will infl u-
ence the setting needed for best cooking results.
• The cooktop will remain on Power Boil for up to
10 minutes. After 10 minutes, the cooking zone will
automatically change to the high (9) setting.
• The Hot Surface indicator (H) will show in the
setting indicator when heat is detected in a cook
zone that has been turned off . The indicator will re-
main on until the heated surface area has cooled
suffi ciently.
Figure 12: Induction cooking zone control
Bekijk gratis de handleiding van Frigidaire FCFI3083SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | FCFI3083SS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4637 MB |
