Handleiding
Je bekijkt pagina 25 van 31
24
1. Make sure that your appliance is unplugged.
2. Pry hole covers and screws, then pry the top cover
up and remove the three screws that secure the
upper hinge to the door, then remove the hinge.
3. Remove the freezer door from the cabinet.
4. Remove the screws that secure the lower hinge to the
right side of the cabinet, then remove the hinge.
5. Remove the washer and nut that secure the pin shaft to the right hole on the lower hinge,
then remove the shaft
6. Insert the pin shaft into the left hole on the lower hinge, then secure the shaft with the washer
and nut.
7. Install the lower hinge on the left side of the cabinet.
8. Remove the screw that secures the door stop from the bottom right of the
freezer door, then remove the door stop and install to the bottom left side.
9. Install the freezer door.
10. Move the door bushing from the top right side of the freezer door to the top left side of the
door. And move the left hole cover to the right side.
11. Secure the upper hinge to the top left side of the
cabinet with the three screws you removed
previously. Before you tighten the upper hinge
screws, make sure that the top of the door is level
with the cabinet and that the rubber gasket makes a
good seal.
12. Install the top cover over the cabinet
Bekijk gratis de handleiding van FrigeluX CTT92NE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | FrigeluX |
| Model | CTT92NE |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 4317 MB |
