Friedrich ZoneAire Select PZH12K3SC handleiding

Niet gecategoriseerd

Friedrich

73 pagina's

PDF beschikbaar

Handleiding

OPERATION

Function and Control

(After reprogramming, disconnect the power cord and then power up again to make it effective)

Warning: #2 and #3 should be matched the unit type, but #2 can be switched to OFF to set as Emergency Heat Override! This will

cause the E-heater to run all the time.

Advanced Settings

When unit is OFF, press the cool key and fan speed key at the same time for more than 5s. When d0 is displayed, it will enter the advanced

parameter setting state;

Press cool key to switch parameter code and parameter value;

Press + or -key to switch parameter code or set parameter value;

ON/OFF key is used to save and exit settings

Code Function description Parameter value Parameter value description

d0 Selection of temperature unit ˚F The unit of temperature is

Fahrenheit.

˚C The unit of temperature is Celsius.

d1 Select of control method P The control method is touchpad

control.

r The control method is universal

24V thermostat control.

d2 Maximum temperature setting d3 to /90˚F Setting the maximum value is d2,

default d2 is 90˚F

d3 Minimum temperature setting 60˚F ~~d2 Setting the minimum value is d3,

default d3 is 60˚F d2

d4 Indoor temperature calibration -9（~~9（ Recalibration is required after

switching temperature unit

d5 Temperature display selection 0~~1 1 indicates the indoor sensor

temperature; 0 indicates the set

temperature

Table 207

Bekijk gratis de handleiding van Friedrich ZoneAire Select PZH12K3SC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.